39

Switch over to the actual TV channel during

playback

As soon as you turn on the DVD recorder, the currently selected TV
channel on the DVD-Recorder is recorded in a temporary storage
(Time Shift Buffer).
Recordings in the Time Shift Buffer will be automatically deleted e.g.
after 3 hours if the period of the Time Shift Buffer is set to 3 hours
(factory setting).
You can play back a disc, while the current TV show is still being
recorded.
1To interrupt playback from a disc, press TUNER 0
PYou will see the TV-show from the selected TV channel on
the DVD-recorder
OTo continue playback, from the disc press DISC MENU B.

Inserting a disc

1Press the OPEN/CLOSE J3button on the front.
OPENING P01
PThe disc tray will open. While the disc tray is opening, the
display shows 'OPENING' and then 'TRAY OPEN' when the tray
is fully open.
2Carefully place the disc in the tray with the label facingup and
press PLAY GRor OPEN/CLOSE J3.
P'CLOSING' and then 'READING' will appear in the display. The
information on the disc will be read.
How do I insert a double-sidedDVD?
Double-sided discs do not have labelling over the whole surface. The
labelling for each side is in the centre of the disc. To play a side its label
must be facing up.
Opening/closing the tray using the remotecontrol
You can open and close the disc tray using the remote control.
Press and hold the STOP hNbutton on the remote control until
the dialog box shows 'OPENING'or'CLOSING'.

Playing a DVD video disc

A menu may appear when a DVD is played back. If the titlesand
chapters are numbered, press a number button on the remote control.
OYou can also use the DK,CM,AI,BObuttons
or number buttons 0..9 to select a menu item and confirm
with OK L.
OYou can also access the menu using DISC MENU Bon the
remote control.
1If playback does not start automatically, press PLAYGR.
Ptitle/chapter number, elapsed time will appear on the display.
C01 2:04
2To stop playback, press STOP hNon the remote control or
hAon the DVD recorder.
3To remove the disc, press OPEN/CLOSE J3on the front of
the DVD recorder.

Regional code

DVDs must be marked 'ALL' for all regions or '2' for
region 2 to work in this device. If the DVD is marked
with a different region, it cannot be played in this DVD
recorder.
The number within the globe represents the region.
Regional code 2 includes:
Europe, Japan, South Africa, Middle East (incl. Egypt).
Playback from an optical disc