16English
3Tilt the keg with the assembled tap unit towards you and take it out
of the appliance.
4Press on the release buttons on both sides of the tap unit (1).The tap unit is released from the keg with a click and you can remove it
(2).
You have to remove the tap unit from the keg before you can replace the tube.
Always replace the tube when you install a new keg. Never use a tube for more than 30 days.
5 Hold the tap unit over a sink.
6 Press the blue tube release button to release the tube.
7Pull the tube connector out of the tap unit and remove the flexible tube out of the tap body.
Always clean the tap unit with hot water and, if necessary, some washing- up liquid before you insert a new tube.
8Assemble the tap unit onto the keg (see chapter ‘Preparing for
use’, section ‘Placing the tap unit onto the keg’).
9Insert a new tube into the tap unit (see chapter ‘Preparing for use’, section ‘Placing the tube into the tap unit’).
10Place the new keg into the appliance (see chapter ‘Preparing for use’, section ‘Placing the keg into the appliance’).
