20 English
Problem | Solution |
|
|
| Remove the tap unit and tube and reinstall them. If the problem continues |
| to occur, contact the PerfectDraft call centre in your country to obtain a |
| new tube. |
The appliance makes a | Because the appliance chills constantly, the fan works continuously. |
sound. |
|
| The pump may go on while you pour beer to maintain the right pressure. |
| When you are not pouring beer, the pump also goes on every now and |
| then to keep the appliance at the right pressure. |
The pump goes on frequently when I am not pouring beer.
Tap unit
Reinstall the tap unit and tube. If this does not help, try another keg together with a new tube. If the problem continues to occur, contact the PerfectDraft call centre in your country.
It is difficult to place the tap unit onto the keg.
It is difficult to press the release buttons to remove the tap unit.
Make sure no old beer is left in the tap unit. Clean the entire tap unit with hot water and, if necessary, some
First remove the keg from of the appliance.Then press the release buttons to remove the tap unit from the keg.
Beer residues may cause the tap unit to stick to the keg. Clean the tap unit with hot water and, if necessary, some
It is not possible to place the keg with the assembled tap unit in the appliance.
Make sure the tap unit is placed correctly on the keg. Push the tap unit down firmly when you place it onto the keg. See chapter ‘Preparing for use’, section ‘Placing the tap unit onto the keg’.
Check if you have lifted the blue locking levers properly and push them down after you have installed the keg.
The tube cannot be removed from the tap unit.
It is difficult to place the tube into the tap unit.
LCD display
There is a green dash on the display and the appliance does not work.
There is a green or red dash on the display and the background light flashes.
Remove the tap unit first before you remove the tube. Rinse the tap unit with hot water. Press the tube release button and pull the tube out of the spout.
Make sure the tube is placed correctly (see chapter ‘Preparing for use’, section ‘Placing the tube into the tap unit’).
Make sure you clean the tap unit with hot water before you insert a new tube.
The tube may be broken. Contact the PerfectDraft call centre in your country to obtain a new tube.
Make sure that the tap unit is placed correctly (see chapter ‘Preparing for use’, section ‘Placing the tap unit onto the keg’).
Remove the tap unit, clean it and reinstall the tap unit. If this does not help try another keg with a new tube.
