![](/images/new-backgrounds/1059754/5975417x1.webp)
English 9
6 Place the preferred medallion on top of the handle.
Placing the tap unit onto the keg
Always clean the tap unit with hot water and, if necessary, with some
1Remove the protection cap and the tube from the keg.
2Put the tap unit onto the connection top of the keg by pushing it down firmly (‘click’).
If you snap the tap unit onto the keg correctly, it fits nicely between the two chimes of the keg.
Tip: If you can move the arm of the connection top freely up and down, the tap unit is placed properly on the keg.