![](/images/new-backgrounds/1059754/5975441x1.webp)
|
|
| English 21 |
| Problem |
| Solution |
|
|
|
|
|
|
| If the problem continues to occur, please contact the PerfectDraft call |
|
|
| centre in your country. |
| The display shows the |
| For proper functioning of the volume indication, it is crucial that you open |
| wrong volume. |
| the tap handle completely (see chapter ‘How to pour a perfect beer’). |
|
|
| In case of a power failure or if the appliance has been disconnected from |
|
|
| the mains, the level indication will be accurate again after you have poured |
|
|
| a few glasses of beer. |
| Pouring beer |
|
|
| No beer comes out when | I | Perhaps the keg is empty. Put a new keg into the appliance. |
| pull the tap handle. |
|
|
|
|
| Make sure the tube is fitted correctly in the tap unit (see chapter |
|
|
| ‘Preparing for use’, section ‘Placing the tube into the tap unit’). |
|
|
| Make sure that the tap unit is placed correctly on the keg (see chapter |
|
|
| ‘Preparing for use’, section ‘Placing the tap unit onto the keg’). |
| Too much foam comes out |
| Make sure you open the tap completely when you pour beer (see chapter |
| of the appliance. |
| ‘How to pour a perfect beer’). |
|
|
| The beer is too warm. Wait until the beer is cold enough to be poured, i.e. |
|
|
| when temperature on the display is green. |
|
|
| The keg has been shaken too much. Wait half an hour for the beer to |
|
|
| settle. |
|
|
| The first glass can contain more foam than usual.Try pouring a second |
|
|
| glass. |
|
|
| The tube may not function properly. Contact the PerfectDraft call centre |
|
|
| in your country to obtain a new tube. |
| The foam head is too high. |
| See chapter ‘How to pour a perfect beer’. |
| The beer that comes out |
| Check if the keg has been open for over 30 days and check if the expiry |
| of the appliance is flat. |
| date of the keg has passed. |
|
|
| Perhaps the glasses you used were not clean enough. Rinse the glasses |
|
|
| with water and some |
|
|
| water to remove all grease and soap residues |
|
|
| Pour beer as described on the keg and in this user manual (see chapter |
|
|
| ‘How to pour a perfect beer’). |
| The foam head collapses |
| Perhaps the glasses you used were not clean enough. Rinse the glasses |
| very quickly. |
| with water and some |
|
|
| water to remove all grease and soap residues. |
|
|
| Make sure the beer is cold enough to be poured, i.e. when temperature |
|
|
| on the display is green. |
| The keg fell, can I still use it? | When it is an unopened keg and it does not have any visual damage, you | |
|
|
| can try to use it. When the keg is already open, you cannot use the keg |
|
|
| anymore and have to install a new keg. |