Pioneer DDJ-ERGO-K, DDJ-ERGOlimited Starting the system, Outputting sound, Loading tracks and playing them, Quitting the system, Starting this unit, Launching TRAKTOR LE, CUE, CUE, CUE, 10En

Starting the system

Starting this unit1 Connect this unit to your computer via a USB cable.

MASTER OUT1 (TRS)	MASTER OUT2	MIC	VOL INPUT SELECT VOL	AUX IN	ON OFF	USB
R	L R	L	MIC AUX	R	L
			MIC AUX

2Boot up the connected computer.3Slide this unit’s [ON/OFF] switch to the [ON] position.

VOL INPUT SELECT VOL	AUX IN	ON OFF	USB
MIC AUX	R	L
MIC AUX

4 Press the [f] button to play the track.

!When this button is pressed again during playback, playback pauses.

Outputting sound

!Set the volume of the power amplifiers connected to the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level. Note that if the volume is set too high, the output sound could be very loud.

1Operate the [GAIN] control and the channel faders to adjust the audio level output from the respective decks.

2Operate the crossfader to switch the deck whose sound is output from the speakers.

—Left edge: Sound is output from deck [A] or [C].

—Center: The sound of all the decks is mixed and output.

—Right edge: Sound is output from deck [B] or [D].

3Turn the [MASTER VOL] control to adjust the audio level of the speakers.

Turn on the power of this unit.

!The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears.

4Turn on the connected microphone and external equipment.Launching TRAKTOR LE 2

When this unit has just started, wait for the illumination to stop before launching TRAKTOR LE 2.

The [Audio Setup] and other settings must be made when using TRAKTOR LE 2 with this unit connected.

For details, see Initial settings on page 5.

For Windows

From the Windows [Start] menu, open [All Programs] > [Native Instruments] > [Traktor 2], then click the [Traktor 2] icon.

For Mac OS X

In Finder, open the [Application] folder, next open [Native Instruments] > [Traktor 2], then double-click the [Traktor] icon.

Loading tracks and playing them

1Turn the rotary selector while pressing the [SHIFT] button to select a folder or item.

!When a folder or item with the [+] mark is selected and the rotary selector is pressed while pressing the [SHIFT] button, that folder or item is opened or closed.

2Release the [SHIFT] button then turn the rotary selector to select the track.3Press the [LOAD] button to load the selected track onto the deck.

Monitoring sound with headphones1Connect headphones to the [PHONES] terminal.2Press the headphones [CUE] button for the deck you want to monitor.3Turn the [HEADPHONES MIX] control.

—Turn counterclockwise: The sound of the deck for which the headphones [CUE] button is pressed becomes relatively louder.

—Center position: The sound of the deck for which the headphones [CUE] button is pressed and the [MASTER OUT 1, MASTER OUT 2] sound have the same volume.

—When turned clockwise: The volume of [MASTER OUT 1] and [MASTER OUT 2] become relatively louder.

4Turn the [HEADPHONES VOL] control.

The sound of the deck for which the headphones [CUE] button is pressed is output from the headphones.

!When the headphones [CUE] button is pressed again, monitoring is canceled.

Quitting the system

1Quit TRAKTOR LE 2.2Slide this unit’s [ON/OFF] switch to the [OFF] position.3Disconnect the USB cable from your computer.4Turn off the connected microphone and external equipment.

10En