6At the [Are you using an external mixer?] item, select [Yes] if using an external mixer, [No] if not, then click [Next].

7Click [Finish] at the bottom right to complete the setup wizard settings.
!Input Routing

The initial settings for TRAKTOR LE 2 are shown below.

To use external inputs with the initial settings, make the settings below.

These settings are not required when not using external inputs.

—Input Aux:L(Mono) 1:DDJ-ERGO AUX/MIC LR 2:DDJ-ERGO AUX/MIC R

8Open [File]>[Controller Manager...] if using windows, [Traktor]>[Preferences]>[Controller Manager] if using Mac OS X, then from [Device] under [Device Setup], select [PIONEER DDJ-ERGO - Generic MIDI] and set

the device corresponding to this unit for [In-port] and [Out-port].

Cautions

The preferences are reset after the setup wizard settings are made. When using the DDJ-ERGO-K, note that the audio settings below are required at a minimum.

!Audio Setup—Audio Device:Pioneer DDJ ASIO (Windows 7)PIONEER DDJ-ERGO (Mac OS X 10.6/10.7)!Output Routing—Mixing Mode:Internal—Output Monitor:L 3:DDJ-ERGO PHONES LR 4:DDJ-ERGO PHONES R—Output Master:L 1:DDJ-ERGO MASTER LR 2:DDJ-ERGO MASTER R

9Close TRAKTOR 2, turn this unit’s power off then back on, then relaunch TRAKTOR 2.

This completes all of the settings.

6En