!Turn:
Changes the width of the loop playback section.
!Press:
Turns loop playback on and off.
![SHIFT] + turn:
Moves the beat grid position.
![SHIFT] + press:
Switches loop playback on/off.
9DECK buttonsTRAKTOR PRO 2
AHOT CUE/DELETE buttonsTRAKTOR PRO 2
BKEYLOCK (TEMPO RANGE) button!Press:
Turns the key lock function on and off.
![SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time this is pressed.
CVINYL (PULSE MODE) button!Press:
This switches the [VINYL] mode on/off.
![SHIFT] + press:
Switches the jog dials’ illumination mode (Pulse Mode).
DTEMPO sliderAdjusts the playing speed.
ESYNC (MASTER) button!Press:
Synchronizes to the master deck’s tempo.
![SHIFT] + press:
Sets the master deck for synchronization.
FJog dial!Scratch
When the [VINYL] mode is turned on and the jog dial is turned while pressing on its top, the track is played according to the direction and speed at which the jog dial is turned.
!Pitch bend
The playing speed can be adjusted by turning the outer part of the jog dial during playback.
The top of the jog dial has an embedded switch. Do not place objects on the jog dial or subject it to strong forces. Also note that water or other liquids getting into the set will lead to malfunction.
GSAMPLER buttonTRAKTOR PRO 2
HSAMPLE VOL controlTRAKTOR PRO 2
IMASTER VOL controlAdjusts the sound level output from the master.
JAUX/MIC VOL controlAdjusts the audio output level of the [AUX IN] and [MIC] terminals.
KGAIN controlsAdjust the sound level input to the various decks.
LFUNCTION (REC) button!Press:
Loads the track selected with the cursor into the preview player and plays it.
MHEADPHONES MIX controlAdjusts the balance of the monitor volume between the sound of the deck whose [CUE ] button is pressed and the master sound.
Adjusts the audio level output from the [PHONES] terminal.
OEQ (HI, MID, LOW) controlsThese adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
PCUE (Headphones cue buttons)Use this to monitor the sound of the respective decks over the headphones.
QChannel fadersAdjust the sound level output from the various decks.
RCrossfaderSwitches the sound of the decks assigned to the left and right sides of the crossfader for output.
Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit.
SCONTROL dialChanges the balance between the effect sound and original sound.
TEffect parameter controlsThese adjust the effects’ parameters.
![SHIFT] + turn:
Selects the type of effect.
With TRAKTOR LE 2,
!Turns clockwise to apply the high pass filter.
!Turns counterclockwise to apply the low pass filter.
VFX ON buttonTRAKTOR PRO 2
WEffect parameter buttonsThese switch the effects on and off.
XEffect assign buttonsTRAKTOR PRO 2
YF1 controlTRAKTOR PRO 2
ZF2 buttonTRAKTOR PRO 2
AF3 buttonTRAKTOR PRO 2
English
En 9