Pioneer DEH-P65BT Basic Operations, Power ON/OFF, Selecting a source, Turning the unit on

Section
02		Operating this unit
		Functions are the same as	Basic Operations
		MULTI-CONTROL except for volume con-	Power ON/OFF
		trol.
	e DIRECT button		Turning the unit on
		Press to directly select the desired track.	% Press SOURCE to turn the unit on.
	f CLEAR button
		Press to cancel the input number when 0 to	Turning the unit off
		9 are used.	% Press SOURCE and hold until the unit
	g 0 to 9 buttons
			turns off.
		Press to directly select the desired track,
		preset tuning or disc. Buttons 1 to 6 can op-	Selecting a source
		erate the preset tuning for the tuner or disc
		number search for the multi-CD player.	You can select a source you want to listen to.
	h OFF HOOK button		To switch to the built-in CD player, load a disc
			in the unit (refer to page 16).
		Press to start talking on the phone while op-
		erating a phone source.	% Press SOURCE to select a source.
	i ON HOOK button		Press SOURCE repeatedly to switch between
			the following sources:
		While operating the phone source, press to
			Tuner—Television—DVD player/Multi-
		end a call or reject an incoming call.
			DVD player—Built-in CD player—Multi-
	j ATT button
			CD player—iPod—External unit 1—Exter-
		Press to quickly lower the volume level, by	nal unit 2—AUX1—AUX2—BT Audio—BT
		about 90%. Press once more to return to the	Telephone
		original volume level.
	k PGM button		Notes
			! In the following cases, the sound source will
		Press to operate the preprogrammed func-
		tions for each source. (Refer to Using the	not change:
		PGM button on page 47.)	— When there is no unit corresponding to the
	l AUDIO button		selected source connected to this unit.
			— When there is no disc or magazine in the
		Press to select various sound quality con-
			player.
		trols.
			— When the AUX (auxiliary input) is set to off
			(refer to page 43).
			— When the BT AUDIO source is set to off
			(refer to Activating the BT AUDIO source
			on page 44).
			! AUX1 is set to on by default. Turn off the AUX1
			when not in use (refer to Switching the auxili-
			ary setting on page 43).

10 En