Pioneer DEH-P65BT Deleting a registered phone, Connecting to a registered cellular phone

	Section
Operating this unit	02

#As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, NO DATA is displayed. If the assignment is already taken, the device name appears. To replace an assignment with a new phone, first delete the current assign- ment. For more detailed instructions, see Deleting a registered phone on this page.

#If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Press MULTI-CONTROL to register the currently connected phone.

When the registration is completed,

REG COMPLETED is displayed.

# If the registration failed, REG ERROR is dis- played. In this case, return to step 1 and try again.

Deleting a registered phone

If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone.

!If a registered phone is deleted from this unit, the Phone Book and other settings of that phone are cleared simultaneously.

1Use MULTI-CONTROL to select

DELETE PHONE in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)

# If the assignment is empty, NO DATA is dis-

played and the operation is not possible.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Push MULTI-CONTROL right to select

DELETE YES.

DELETE YES is displayed. Deleting phone is now on standby.

4Press MULTI-CONTROL to delete the phone.

After the phone is deleted, DELETED is dis- played.

Connecting to a registered cellular phone

Once your phone is registered with this unit it is a simple matter to establish a Bluetooth wireless connection, either manually by select- ing a registration assignment, or automatically when a registered phone is within range.

Connecting to a registered phone manually

1Use MULTI-CONTROL to select CONNECT PHONE in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)

# If the assignment is empty, NO DATA is dis-

played and the operation is not possible.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, CONNECTING is displayed. After the connection is completed,

CONNECTED is displayed.

# If AUTO CONNECT is on, the most recently connected registered cellular phone is connected automatically. For more details, refer to Connect- ing to a registered phone automatically on this

page.

# If the connection failed, ERROR is displayed. Check the cellular phone, then try again.

Connecting to a registered phone automatically

When automatic connection is active, this unit will automatically establish a connection with a registered cellular phone. When the most re- cently connected registered cellular phone comes into range, automatic connection is performed.

English

En 29