Pioneer DEH-P65BT operation manual Using ITS playlists, Function and operation

Available accessories

Section

03

Function and operation

REPEAT, RANDOM, SCAN, PAUSE, COMP/DBE and TITLE INPUT operations are basically the same as that of the built-in CD player.

Function name Operation

!After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

!When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE INPUT. The disc title has al- ready been recorded on a CD TEXT disc.

English

Refer to Selecting a repeat play range on page 18.

But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the multi-CD player are

REPEAT	as below:
	! MCD – Repeat all discs in the
	multi-CD player
	! TRACK – Repeat just the cur-
	rent track
	! DISC – Repeat the current disc
RANDOM	Refer to Playing tracks in random
	order on page 18.
SCAN	Refer to Scanning folders and
	tracks on page 18.
PAUSE	Refer to Pausing disc playback on
	page 18.
	Refer to Using compression and
	BMX on page 18.
	Multi-CD player has DBE (dynamic
	bass emphasis) function instead
COMP/DBE	of BMX.
	The settings can be switched as
	below:
	COMP OFF—COMP 1—COMP 2
	—COMP OFF—DBE 1—DBE 2
ITS PLAY	Refer to Using ITS playlists on this
	page.
ITS MEMO	Refer to Using ITS playlists on this
	page.
TITLE INPUT	Refer to Entering disc titles on
	page 19.

Notes

!If you select other discs during repeat play, the repeat play range changes to MCD.

!If you perform track search or fast forward/re- verse during TRACK, the repeat play range changes to DISC.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1Play a CD that you want to program. Push MULTI-CONTROL up or down to select the CD.

2Use MULTI-CONTROL to select

ITS MEMO in the function menu.

3Select the desired track by pushing MULTI-CONTROL left or right.

4Push MULTI-CONTROL up to store the currently playing track in the playlist. MEMORY COMPLETE is displayed and the currently playing selection is added to your playlist.

5Press BAND to return to the playback display.

Note

After data for 100 discs has been stored in mem- ory, data for a new disc will overwrite the oldest one.

En 51