
| Section |
Operating this unit | 02 |
|
|
#If an invalid character has been entered in the beginning, PIN code cannot be stored in mem- ory.
Editing device name
You can edit the device name.
The device name is set to PIONEER BT UNIT as default.
1Use
EDIT DEVICE NAME.
2Press DISPLAY to select the desired character type.
Press DISPLAY repeatedly to switch between the following character types:
3Push
4Push
5Move the cursor to the last position by pushing
Push
the device name in memory temporarily.
# Pressing
od, cursor doesn’t need to be the last position.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the beginning, device name cannot be stored in memory.
Displaying system version for repair
Should this unit fails to operate properly and you consult with dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.
1Use
2Push
The system (microprocessor) version of this
unit is displayed.
# Pushing
Resetting the Bluetooth wireless technology module
Bluetooth telephone and Bluetooth Audio data can be deleted. To protect personal infor- mation, we recommend deleting this data be- fore transferring the unit to other persons. The following settings will be deleted.
!phone book entries on the Bluetooth tele- phone
!preset numbers on the Bluetooth tele- phone
!registration assignment of Bluetooth tele- phone
!call history of Bluetooth telephone
!history of the most recently connected Bluetooth audio
1Use
BT RESET.
2Push
BT RESET YES is displayed. Clearing memory
is now on standby.
# If you do not want to reset phone memory, press BAND.
3Press
English
En 45