Pioneer DEH-P65BT Using the equalizer, Recalling equalizer curves, Adjusting equalizer curves

Section

02Operating this unit

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display Equalizer curve

POWERFUL Powerful

2Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order:

LOW (low)—MID (mid)—HI (high)

3Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band in- creases or decreases.

+6 to –6 is displayed as the level is increased or decreased.

NATURAL Natural

VOCAL Vocal

CUSTOM Custom

FLAT Flat

SUPER BASS Super bass

!CUSTOM is an adjusted equalizer curve that you create.

!When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

1Use MULTI-CONTROL to select P.EQ.

2Push MULTI-CONTROL left or right to select the equalizer.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the fol- lowing order:

POWERFUL—NATURAL—VOCAL—CUSTOM

—FLAT—SUPER BASS

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.

1 Use MULTI-CONTROL to select EQ.

#You can then select another band and adjust the level.

Note

If you make adjustments, CUSTOM curve is up- dated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HI).

Level (dB)

Q=2N Q=2W

Center frequency Frequency (Hz)

1Use MULTI-CONTROL to select fre- quency and the Q factor display. Frequency and the Q factor (e.g., EQ-LOW 80HZ Q1W) appears in the display.

2Push MULTI-CONTROL left or right to select the desired frequency.

Each time MULTI-CONTROL is pushed left or right, frequencies are selected in the following order:

Low: 40—80—100—160 (Hz)

Mid: 200—500—1k—2k (Hz)

High: 3.15k—8k—10k—12.5k (Hz)

38 En