Pioneer DEH-P65BT Resetting the microprocessor, Removing the front panel, 01Before You Start

Section

01Before You Start

!Avoid subjecting the front panel to excessive shocks.

!Keep the front panel out of direct sunlight and high temperatures.

Removing the front panel

1Press OPEN to open the front panel.

2Grip the left side of the front panel and pull it gently outward.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent perma- nent damage.

!When strange or incorrect messages ap- pear on the display

1 Remove the front panel.

Refer to Removing the front panel on this page.

2Press RESET with a pen tip or other pointed instrument.

RESET button

3Replace the front panel by clipping it into place.

3Put the front panel into provided pro- tective case for safe keeping.

Attaching the front panel

%Replace the front panel by holding it upright to the unit and clipping it securely into the mounting hooks.

Resetting the microprocessor

The microprocessor must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!If the unit fails to operate properly

8 En