| Section |
Operating this unit | 02 |
|
|
Audio Adjustments
Introduction of audio adjustments
1Audio display
Shows the audio adjustment status.
2SW indicator
Shows when the subwoofer output is turned on.
3BASS indicator
Shows when the bass boost is in effect.
4Loudness indicator
Appears in the display when loudness is turned on.
5FIE indicator
Shows when the front image enhancer is turned on.
1Press
FUNCTION or AUDIO appears on the display.
2Use
The audio function name appears on the dis- play.
3Turn
Turn
BASS BOOST (bass
# When the subwoofer controller setting is PREOUT:FULL, you cannot switch to SUB W1 (subwoofer on/off setting). (Refer to page 43.)
#When the rear output setting is REAR SP:SUB W, you cannot select FIE.
#When the F.I.E. function is on, you cannot se- lect HPF.
#When the high pass filter is on, you cannot se- lect FIE.
#You can select the SUB W2 only when sub- woofer output is turned on in SUB W1.
#When selecting the FM tuner as the source, you cannot switch to SLA.
#To return to the display of each source, press BAND.
#If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.
1Use
# If the balance setting has been previously ad- justed, BALANCE will be displayed.
2Push
Each time
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is
REAR SP:SUB W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 43.
3Push
Each time
L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.
English
En 37