Pioneer DEH-P65BT Other Functions, Using the AUX source, Switching the display illumination

Section
02		Operating this unit
	Other Functions		Selecting AUX as the source
	Using the AUX source		% Press SOURCE to select AUX as the
			source.
	This unit can control up to two auxiliary equip-
			# If the auxiliary setting is not turned on, AUX
	ments such as VCR or portable devices (sold
			cannot be selected. For more details, see Switch-
	separately). When connected, auxiliary equip-
			ing the auxiliary setting on page 43.
	ments are automatically read in as AUX
	sources and assigned to AUX1 or AUX2. The		Setting the AUX title
	relationship between AUX1 and AUX2
			The title displayed for each AUX1 or AUX2
	sources is explained below.
			source can be changed.

About AUX1 and AUX2

You have two methods to connect auxiliary equipments to this unit.

AUX1 source:

When connecting auxiliary equipment using a stereo mini plug cable

%Insert the stereo mini plug into the input jack on this unit.

For more details, refer to the installation man- ual.

The allocation of this auxiliary equipment is automatically set to AUX1.

AUX2 source:

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

The allocation of this auxiliary equipment is

automatically set to AUX2.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

1After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display TITLE INPUT.

2Enter a title in the same way as the built-in CD player.

For details concerning operation, refer to En-

tering disc titles on page 19.

# The AUX title can be up to 8 characters long.

Switching the display illumination

You can change the color of the display illumi- nation.

%Press ILLUMINATION.

Each time you press ILLUMINATION the color changes:

RAINBOW (rainbow)—WHITE (white)— SKYBLUE (sky blue)—OCEANBLUE (ocean blue)—DEEPBLUE (deep blue)—PINK (pink)— RED (red)—AMBER (amber)—ORANGE (or- ange)—GREEN (green)—PUREGREEN (pure green)—CUSTOM (custom)

Notes

!RAINBOW setting cycles continuously through all the colors.

!CUSTOM is an adjusted color that you create (refer to Adjusting the illumination color on page 44).

!If you do not operate the function within about eight seconds, the display is automatically re- turned.

46 En