Pioneer DEH-P65BT operation manual Receiving traffic announcements, Using PTY functions

Section

02Operating this unit

1Use MULTI-CONTROL to select REGIONAL in the function menu.

2Press MULTI-CONTROL to turn the re-

gional function on.

# To turn the regional function off, press MULTI-CONTROL again.

Notes

!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

!The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station.

!The regional function can be turned on or off independently for each FM band.

4Press TA/NEWS while a traffic an- nouncement is being received to cancel the announcement.

The tuner returns to the original source but re- mains in the standby mode until TA/NEWS is pressed again.

Notes

!You can also turn the TA function on or off in the menu that appears by using

MULTI-CONTROL.

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta- tions are tuned in during seek tuning or BSM when TA is on.

Receiving traffic announcements

TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1Tune in a TP or enhanced other net- work’s TP station.

TP indicator will light.

2Press TA/NEWS to turn traffic an-

nouncement standby on.

# To turn traffic announcements standby off, press TA/NEWS again.

3Use MULTI-CONTROL to adjust the TA volume when a traffic announcement be- gins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

Using PTY functions

You can tune in a station by using PTY (pro- gram type) information.

Searching for an RDS station by PTY information

You can search for general types of broadcast- ing programs, such as those listed on the next page.

1Use MULTI-CONTROL to select PTY in the function menu.

2Push MULTI-CONTROL left or right to select a program type.

NEWS INFO—POPULAR—CLASSICS— OTHERS

3Press MULTI-CONTROL to begin the search.

The unit searches for a station broadcasting that program type. When a station is found its program service name is displayed.

PTY (program type ID code) information is

listed on the next page.

# To cancel the search, press MULTI-CONTROL

again.

# The program of some stations may differ from that indicated by the transmitted PTY.

14 En