Section

02Operating this unit

1Use MULTI-CONTROL to select calendar.

2Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the calendar display: Day—Month—Year

As you select segments of the calendar dis- play the segment selected will blink.

3Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing MULTI-CONTROL down will decrease the se- lected day, month or year.

Setting the clock

Use these instructions to set the clock.

1Use MULTI-CONTROL to select Clock.

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display the segment selected will blink.

3Push MULTI-CONTROL up or down to put a clock right.

Note

You can match the clock to a time signal by pressing MULTI-CONTROL.

!If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Turning the off clock display on or off

If the off clock display is turned on, when the sources are off, the clock appears on the dis- play.

1Use MULTI-CONTROL to select

OFF CLOCK.

2Press MULTI-CONTROL to turn the off

clock display on.

# To turn the off clock display off, press MULTI-CONTROL again.

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

1Use MULTI-CONTROL to select FM STEP.

2Press MULTI-CONTROL to select the FM tuning step.

Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will appear in the display.

Note

The tuning step remains at 50 kHz during manual tuning.

Switching Auto PI Seek

The unit can automatically search for a differ- ent station with the same programming, even during preset recall.

1Use MULTI-CONTROL to select AUTO PI.

2Press MULTI-CONTROL to turn Auto PI

seek on.

# To turn Auto PI seek off, press MULTI-CONTROL again.

42 En

Page 42
Image 42
Pioneer DEH-P65BT Setting the clock, Turning the off clock display on or off, Setting the FM tuning step, OFF Clock