Polycom 1725-11530-310 manual Multiple Registrations, Server server/ on page A-7

Configuring Your System

Multiple Registrations

The SoundPoint IP 301, 320, 330, and 430 support a maximum of two registrations, the SoundPoint IP 501 supports three, the SoundPoint IP 550 and 560 supports four, and the SoundPoint IP 600, 601, and 650 support 6. Up to three SoundPoint IP Expansion Modules can be added to a single host SoundPoint IP 601 and 650 phone increasing the total number of buttons to 12 registrations on the SoundPoint IP 601 and 34 registrations on the SoundPoint IP 650 and 670. The SoundStation IP 4000, 6000, and 7000 supports a single registration.

Each registration can be mapped to one or more line keys (a line key can be used for only one registration). The user can select which registration to use for outgoing calls or which to use when initiating new instant message dialogs.

Configuration changes can performed centrally at the boot server or locally:

Central	Configuration file:	Specify the local SIP signaling port and an array of SIP servers to
(boot server)	sip.cfg	register to. For each server specify the registration period and the
		signaling failure behavior.
		• For more information, refer to Local <local/> on page A-6and
		Server <server/> on page A-7.
	Configuration file:	For up to maximum number of registrations, specify a display name,
	phone1.cfg	a SIP address, an optional display label, an authentication user ID
		and password, the number of line keys to use, and an optional array
		of registration servers. The authentication user ID and password are
		optional and for security reasons can be omitted from the
		configuration files. The local flash parameters will be used instead.
		The optional array of servers and their associated parameters will
		override the servers specified in sip.cfg if non-Null.
		• For more information, refer to Registration <reg/> on page A-107.
Local	Web Server	Specify the local SIP signaling port and an array of SIP servers to
	(if enabled)	register to.
		Navigate to http://<phoneIPAddress>/appConf.htm#se
		For up to six registrations (depending on the phone model, in this
		case the maximum is six even for the IP 601, 650 and 670), specify a
		display name, a SIP address, an optional display label, an
		authentication user ID and password, the number of line keys to use,
		and an optional array of registration servers. The authentication user
		ID and password are optional and for security reasons can be omitted
		from the configuration files. The local flash parameters will be used
		instead. The optional array of servers will override the servers
		specified in sip.cfg in non-Null. This will also override the servers on
		the appConf.htm web page.
		Navigate to http://<phoneIPAddress>/reg.htm
		Changes are saved to local flash and backed up to <Ethernet
		address>-phone.cfgon the boot server. Changes will permanently
		override global settings unless deleted through the Reset Local
		Config menu selection and the <Ethernet address>-phone.cfgis
		removed from the boot server.

4 - 55