Polycom 1725-11530-310 manual Miscellaneous XML errors can occur on, phones

Administrator’s Guide SoundPoint IP / SoundStation IP

Idle Display <idleDisplay/>

The Microbrowser can be used to create a display that will be part of the phone’s idle display. These settings control the home page and the refresh rate.

Attribute	Permitted Values	Default	Interpretation
mb.idleDisplay.home	Null or any fully	Null	URL used for Microbrowser idle display home
	formed valid HTTP		page. For example:
	URL. Length up to		http://www.example.com/xhtml/frontpage.cgi?pa
	255 characters.		ge=home. If empty, there will be no
			Microbrowser idle display feature. Note that the
			Microbrowser idle display will displace the idle
			display indicator (refer to
			ind.idleDisplay.enabled in Indicators <ind/>
			on page A-80).
			Note: If ind.idleDisplay.enabled is enabled,
			miscellaneous XML errors can occur on
			SoundPoint IP 430, 501, 550, 560, 600, 601,
			650, and 670 and SoundStation IP 4000, 6000,
			and 7000 phones.
mb.idleDisplay.refresh	0 or an integer > 5	0	The period in seconds between refreshes of the
			idle display Microbrowser's content. If set to 0,
			the idle display Microbrowser is not refreshed.
			The minimum refresh period is 5 seconds
			(values from 1 to 4 are ignored, and 5 is used).
			Note: If an HTTP Refresh header is detected, it
			will be respected, even if this parameter is set to
			0. The refresh parameter will be respected only
			in the event that a refresh fails. Once a refresh is
			successful, the value in the HTTP refresh
			header, if available, will be used.

A - 96