Polycom 1725-11530-310 manual These attributes also include

Administrator’s Guide Addendum for the Polycom VVX 1500 Business Media Phone

	Permitted
Attribute	Values	Default	Interpretation
video.screenMode	“normal”, “full”,	Null	Applies to the video window shown in the normal
	“crop”		mode.
			If set to “normal” or Null, all pixels are displayed,
			black bars appear on the top, bottom, or sides of
			the window, if necessary, to maintain the correct
			aspect ratio.
			If set to “full”, all pixels are displayed and the
			image is stretched linearly and independently to fill
			the video frame.
			If set to “crop”, the black bars do not appear, the
			image size is re-sized to maintain the correct
			aspect ratio, and any parts of the image that do not
			fit in the display are cropped.
video.screenModeFS	“normal”, “full”,	Null	Applies to the video window in Full Screen mode.
	“crop”		The image is re-sized to maintain the correct
			aspect ratio and any parts of the image that do not
			fit in the display are cropped.
video.quality	“motion”,	Null	Determine the quality of video shown in a call or
	“sharpness”		conference.
			Use “motion” for people or other video with motion.
			Use “sharpness” or Null for video with little or no
			movement. Moderate to heavy motion can cause
			some frames to be dropped.
video.maxCallRate	128 - 1024	Null	Limits the maximum network bandwidth used in a
	kbps		call. It is used in the SDP bandwidth signaling.
			If honored by the far end, both Rx and Tx network
			bandwidth used in a call will not exceed this value
			(in kbps).
			If set to Null, the value 448 is used.
video.autoFullScreen	0, 1	Null	Flag to determine whether or not video calls use
			the full screen layout.
			If set to 1, video calls will use the full screen layout
			by default. When a video call is first created (upon
			discovery that far-end is video capable) or when
			an audio call transitions to a video call (through
			far-end transfer), the full screen layout will be
			used.
			If set to 0 or Null, video calls only use the full
			screen layout if it is selected by the user.

These attributes also include:

•Camera Controls <camera/>

•Local Camera View <localCameraView/>

1 - 10