Polycom 1725-11530-310 manual SIP/ on page A-10, Configuration on page A-4, PhoneMACaddress.cfg

Administrator’s Guide SoundPoint IP / SoundStation IP

	2. (Optional) Create new configuration file(s) in the style of sip.cfg by
	performing the following steps:
Note
	For more information on why to create another configuration file, refer to the
	“Configuration File Management on SoundPoint IP Phones” whitepaper at
	www.polycom.com/support/voice/ .
	For more information, especially on the SIP server address, refer to SIP
	<SIP/> on page A-10.
	For more information on the sip.cfg file, refer to Application
	Configuration on page A-4.
	Most of the default settings are typically adequate, however, if SNTP
	settings are not available through DHCP, the SNTP GMT offset and
	(possibly) the SNTP server address will need to be edited for the correct
	local conditions. Changing the default daylight savings parameters will
	likely be necessary outside of North American locations.
	a (Optional) Disable the local web (HTTP) server or change its
	signalling port if local security policy dictates.
	b Change the default location settings for user interface language and
	time and date format.
	3. (Optional) Create a master configuration file by performing the following
	steps:
	a Create per-phone or per-platform <Ethernet address>.cfg files by
	using the 00000000000.cfg and files from the distribution as templates.
	For more information, refer to Master Configuration Files on page
	A-2.
	b Edit the CONFIG_FILES attribute of the <Ethernet address>.cfg files
	so that it references the appropriate phone[MACaddress].cfg file.
	For example, replace the reference to phone1.cfg with
	phone[MACaddress].cfg.

3 - 16