Polycom 1725-11530-310 manual OnIntensity, it will be replaced with, OnIntensity value

Administrator’s Guide SoundPoint IP / SoundStation IP

	Permitted
Attribute	Values	Default	Interpretation
up.welcomeSoundOnWarmBootE	0, 1	0	If set to 1, play welcome sound effect on warm
nabled			as well as cold boots.
			If set to 0, only a cold boot will trigger the
			welcome sound effect.
up.localClockEnabled	0, 1	1	If set to 1, display the date and time on the idle
			display.
up.backlight.onIntensity	0 (off),	Null	This parameter controls the intensity of the
	1 (low),		LCD backlight when it turns on during normal
	2 (medium), 3		use of the phone.
	(high)		The default value is medium.
up.backlight.idleIntensity	0 (off),	Null	This parameter controls the intensity of the
	1 (low),		LCD backlight when the phone is idle.
	2 (medium), 3		The default value is low.
	(high)
			Note: If idleIntensity is set higher than
			onIntensity, it will be replaced with the
			onIntensity value.
up.toneControl.bass	-4 to 4, Null	0	Bass equalization control.
			Each step is an increment of 1 dB at 225 kHz
			and 2 dB < 225 Hz.
up.toneControl.treble	-4 to 4, Null	0	Treble equalization control.
			Each step is an increment of 1 dB at 3.7 kHz
			and 2 dB > 10 kHz.
up.audioSetup.auxInput	0 - Other	Null	Auxiliary audio input.
	Input,		If set to Null, default value is 2.
	1 - Polycom
	Wireless Mic,
	2 - off
up.audioSetup.auxOutput	0 - Other	Null	Auxiliary audio output.
	Input,		If set to Null, default value is 2.
	1 - Polycom
	Wireless Mic,
	2 - off
up.idleTimeout	positive	Null	Timeout for the idle display or default call
	integer,		handling display.
	seconds		If set to 0, there is no timeout.
			If set to Null, the default timeout of 20 seconds
			is used.
			If set to value greater than 0, the timeout is for
			that number of seconds (maximum 65536).

A - 26