Polycom 1725-11530-310 manual Request request, Delay delay, Value

Configuration Files

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
ramdisk.enable	0, 1	1	If set to 1, RAM disk will be available. The RAM
			disk is used to cache downloaded wave files, and
			other resources for the user interface.
ramdisk.bytesPerBlock	0, 32, 33, ...,	0	These four parameters use internal defaults when
	1024		value is set to 0.
			Note: For the SoundPoint IP 650 platform,
ramdisk.blocksPerTrack	0, 1, 2, ...,	0
			ramdisk.bytesPerBlock is internally replaced by 2X
	65536
			the value.
ramdisk.nBlocks	0, 1, 2, ...,	4096	Note: For the SoundPoint IP 7000 platform,
	65536		ramdisk.bytesPerBlock is internally replaced by 4X
			the value.
ramdisk.nBlocks.IP_650	0, 1, 2, ...,	2048
	65536
ramdisk.minsize	50 to 16384	50	Smallest size in Kbytes of RAM disk to create
			before returning an error. RAM disk size is variable
			depending on the amount of device memory.
ramdisk.minfree	512 to 16384	3072	Minimum amount of free space that must be left
			after the RAM disk has been created. The RAM
			disk’s size will be reduced as necessary in order to
			leave this amount of free RAM.

Request <request/>

This attribute includes:

•Delay <delay/>

Delay <delay/>

These settings control the phone’s behavior when a request for restart or reconfiguration is received.

Attribute	Permitted	Default	Interpretation
	Values
request.delay.type	Null, “audio”, or	call	Defines the strategy to adopt before a request gets
	“call”		executed. If set to “audio”, a request can be executed as
			soon as there is no active audio on the phone,
			independently of any call state. If set to “call”, a request
			can be executed as soon as there are no calls in any
			state on the phone.

A - 91