Polycom 1725-11530-310 manual Adding a Background Logo, Model Width Height Color Depth

Administrator’s Guide SoundPoint IP / SoundStation IP

2.Manually reboot the phone so that it will download the new key. The phone will automatically reboot a second time to use the new key.

At this point, the phone expects all encrypted configuration files on the boot server to use the new key and it will continue to reboot until this is the case. The files on the server must be updated to the new key or they must be made available in unencrypted format. Updating to the new key requires decrypting the file with the old key, then encrypting it with the new key.

Note that configuration files, contact directory files and configuration override files may all need to be updated if they were already encrypted. In the case of configuration override files, they can be deleted from the boot server so that the phone will replace them when it successfully boots.

Adding a Background Logo

This section provides instructions on how to add a background logo to all

SoundPoint IP phones in your organization. You must be running at least

BootROM 2.x.x and SIP 1.x.x. One bitmap file is required for each model, but

SoundPoint IP 301 phones do not support bitmap logos.

Model	Width	Height	Color Depth
IP 301	n/a	n/a	n/a
IP 320/330	102	23	monochrome
IP 430	94	23	monochrome
IP 501	114	51	2-bit grayscale or
			monochrome
IP 600/601	209	109	2-bit grayscale or
			monochrome
IP 550/560/650	209	109	4-bit grayscale or
			monochrome
IP 670	209	109	12-bit color
IP 4000	150	33	monochrome
IP 6000	150	33	32-bit grayscale or
			monochrome
IP 7000	255	128	32-bit grayscale or
			monochrome

Logos smaller than described in the table above are acceptable, but larger logos may be truncated or interfere with other areas of the user interface.

C - 6