Polycom 1725-11530-310 manual Call Handling Configuration call, Configuration cfg

Administrator’s Guide SoundPoint IP / SoundStation IP

This attribute also includes:

Configuration <cfg/>

Configuration <cfg/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
httpd.cfg.enabled	0, 1	1	If set to 1, the HTTP server configuration interface
			will be enabled.
httpd.cfg.port	1-65535	80	Port is 80 for HTTP servers. Care should be taken
			when choosing an alternate port.

Call Handling Configuration <call/>

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
call.rejectBusyOnDnd	0, 1	1	If set to 1, reject all incoming calls with the
			reason “busy” if do-not-disturb is enabled.
			Note: This attribute is ignored when the line is
			configured as shared. The reason being that
			even though one party has turned on DND, the
			other person/people sharing that line do not
			necessarily want all calls to that number diverted
			away.
			Note: If server-based DND is enabled, this
			parameter is disabled.
call.enableOnNotRegistered	0, 1	1	If set to 1, calls will be allowed when the phone is
			not successfully registered, otherwise, calls will
			not be permitted without a valid registration.
call.offeringTimeOut	positive	60	Time in seconds to allow an incoming call to ring
	integer		before dropping the call, 0=infinite.
			Note: The call diversion, no answer feature will
			take precedence over this feature if enabled. For
			more information, refer to No Answer
			<noanswer/> on page A-115.
call.ringBackTimeOut	positive	60	Time in seconds to allow an outgoing call to
	integer		remain in the ringback state before dropping the
			call, 0=infinite.

A - 64