Polycom 1725-11530-310 manual Per-Phone Configuration, Parameters include

Administrator’s Guide SoundPoint IP / SoundStation IP

	Permitted
Attribute	Values	Default	Interpretation
softkey.feature.buddies	0 or 1	1	If set to 0, the Buddies soft key is not
			displayed.
			If set to 1 or Null, the Buddies soft key is
			displayed.
			Note: pres.idleSoftKeys must be set to
			1 for this soft key to be displayed.
softkey.feature.	0 or 1	1	If set to 0 and the phone has hard keys
basicCallManagement.redundant			mapped for Hold, Transfer, and
			Conference functions (all must be
			mapped), all of these soft keys are not
			displayed.
			If set to 1 or Null, all of these soft keys are
			displayed.

Per-Phone Configuration

This section covers the parameters in the per-phone example configuration file phone1.cfg. This file would normally be used as a template for the per-phone configuration files. For more information, refer to Deploying Phones From the Boot Server on page 3-14.

Polycom recommends that you create another file with your organization’s modifications. If you must change any Polycom templates, back them up first.

For more information, refer to the “Configuration File Management on SoundPoint IP Phones” whitepaper at www.polycom.com/support/voice/.

The parameters include:

•Registration <reg/>

•Calls <call/>

•Diversion <divert/>

•Dial Plan <dialplan/>

•Messaging <msg/>

•Network Address Translation <nat/>

•Attendant <attendant/>

•Roaming Buddies <roaming_buddies/>

•Roaming Privacy <roaming_privacy/>

A - 106