Polycom 1725-11530-310 manual New Call and Callers soft keys, For this soft key to be displayed

				Configuration Files
	Permitted
Attribute	Values	Default	Interpretation
softkey.feature.directories	0	Null	If set to Null, the Dir soft key is displayed
	1		on the SoundPoint IP 320/330 phone, but
	Null (default)		not on any other phone.
			If set to 0, the Dir soft key is not displayed
			on any phone.
			If set to 1, the Dir soft key is displayed on
			all phones as follows:
			•	In the idle state, it is displayed after the
				New Call and Callers soft keys.
			•	In the dialtone state, it is displayed after
				the End Call and Callers soft keys.
			•	During a conference or transfer, it is
				displayed after the Callers and Cancel
				soft keys.
softkey.feature.callers	0	Null	If set to Null, the Callers soft key is
	1		displayed on the SoundPoint IP 320/330
	Null (default)		phone, but not on any other phone.
			If set to 0, the Callers soft key is not
			displayed on any phone.
			If set to 1, the Callers soft key is displayed
			on all phones as follows:
			•	In the idle state, it is displayed after the
				New Call soft key and before the Dir
				soft key.
			•	In the dialtone state, it is displayed after
				the End Call soft key and before the
				Dir soft key.
			•	During a conference or transfer, it is
				displayed before the Cancel soft key.
softkey.feature.mystatus	0 or 1	1	If set to 0, the MyStatus soft key is not
			displayed.
			If set to 1 or Null, the MyStatus soft key is
			displayed.
			Note: pres.idleSoftKeys must be set to
			1 for this soft key to be displayed.

A - 105