Polycom 1725-11530-310 manual Product, Model, and Part Number Mapping

Administrator’s Guide SoundPoint IP / SoundStation IP

Product, Model, and Part Number Mapping

In SIP 2.1.2, enhancements to the master configuration file were made to allow you to direct phone upgrades to a software image and configuration files based on phone model number, firmware part number, or MAC address.

The part number specific version has precedence over the model number version, which has precedence over the original version. For example, CONFIG_FILES_2345-11605-001=”phone1_2345-11605-001.cfg, sip_2345-11605-001.cfg” will override CONFIG_FILES_SPIP601=”phone1_SPIP601.cfg, sip_SPIP601.cfg”, which will override CONFIG_FILES=”phone1.cfg, sip.cfg” for an SoundPoint IP 601.

You can also add variables to the master configuration file that are replaced when the phone reboots. The variables include PHONE_MODEL, PHONE_PART_NUMBER, and PHONE_MAC_ADDRESS.

The following table shows the product name, model name, and part number mapping for SoundPoint IP and SoundStation IP phones:

Product Name	Model Name	Product Part Number
SoundPoint IP 301	SPIP301	2345-11300-001
SoundPoint IP 320	SPIP320	2345-12200-002,
		2345-12200-005
SoundPoint IP 330	SPIP330	2345-12200-001,
		2345-12200-004
SoundPoint IP 430	SPIP430	2345-11402-001
SoundPoint IP 501	SPIP501	2345-11500-030,
		2345-11500-040
SoundPoint IP 550	SPIP550	2345-12500-001
SoundPoint IP 560	SPIP560	2345-12560-001
SoundPoint IP 600	SPIP600	2345-11600-001
SoundPoint IP 601	SPIP601	2345-11605-001
SoundPoint IP 650	SPIP650	2345-12600-001
SoundPoint IP 670	SPIP670	2345-12670-001
SoundStation IP 4000	SSIP4000	2101-06642-001
SoundStation IP 6000	SSIP6000	3111-15600-001
SoundStation IP 7000	SSIP7000	3111-40000-001

C - 26