Polycom 300 manual Classic User Interface, Content at the, Laptop on

Viewing People and Content

—If the other site in the conference is an RPX HD 400, RPX HD 200, or OTX 300, the content appears on their tabletop content monitors.

—If the other site in the conference is a TPX HD, the content appears on their tabletop content monitors (if their room is equipped with these) and on their auxiliary content monitor (if their room is equipped with one).

—If the other site in the conference uses traditional (standalone) video conferencing equipment, the content appears on their content monitor. If the site has only one display, the content appears on that display.

4When you are done using the laptop, do the following:

—	If the laptop is the only content source, touch	Content at the
	top of the Touch Panel screen.
—	If there is more than one content source, touch	Laptop on
	the Content screen for the Enhanced UI.

IMPORTANT: Always disconnect the cable from the laptop when you are done displaying the content so that you do not inadvertently display any private or personal content that may be stored on the laptop.

Classic User Interface

To view content with a laptop when you are using the Classic UI:

1Access the VGA cable in one of the Collaboration Tanks.

2Connect the VGA cable to the VGA Out connector on your laptop.

Note that some laptops require you to enable VGA output (such as by pressing Shift-F5). Refer to your laptop documentation for more information.

3 Display the content on your laptop screen, and then touch	Laptop
on the Touch Panel.

The following then occurs:

—The words “Local Content” and “Laptop” on the Touch Panel change from white to yellow:

—The content appears on all of the tabletop content monitors.

3–7