Using the Touch Panel
Manually Dialing Audio Calls
To manually dial an audio call when you are using the Classic UI:
1Touch Audio Dial.
The Audio Dial Screen for the Classic UI appears as shown in Figure
2Enter the telephone number that you want to call using the touch pad and
then touch Dial/Answer.
To get an outside line, you should dial the number the same way you would dial an ordinary telephone in your organization. For example, some organizations require you to dial a 9 before the number.
If you make a mistake while dialing, touch | Back to edit the number | |
or touch | Clear to erase the number and start over. |
If you touch the Help Desk button when an audio call is connected, the system must hang up the audio call in order to place the help call. A message informs you of this before hanging up the audio call. For more information about placing help calls, refer to Getting Help on page
Hanging Up Calls
If you are on a video call and an audio call concurrently, you must hang up the calls separately. This section describes how to hang up both types of calls.
Hanging Up Video Calls
To hang up a video call:
1If the Hang Up button is not visible on your screen, touch Polycom.
2Touch the Hang Up button on the center of the screen. The message “The call has ended” appears on the screen.
Hanging Up Audio Calls
To hang up an audio call:
1If the Hang Up button is not visible on your screen, touch Polycom.
2 Touch the Hang Up button on the center of the screen.