Polycom 5020, 5040 manual Changing Settings of Out of Range, To turn out of range on/off

Polycom Kirk 5020-5040 User Guide Settings

3Scroll to Auto answer and press Select.

4Scroll to Settings and press Change.

5Scroll to the desired setting and press Select.

Out of Range

The out of range indicator appears when handset is moving out of or already is out of range of base station.

Note: When the handset has been outside the coverage area, it can take up to 30 seconds before the handset is back on the system after re-entering coverage area.

To turn out of range on/off:

1Press Menu to enter main menu.

2Scroll to Settings and press Select.

3Scroll to Out of range and press Select.

4Scroll to On or Off and press Change.

Changing Settings of Out of Range

The handset offers two types of out of range alerts:

•Icon only

•Tone (beep) + icon

With the out of range indicator turned on:

•If handset is moving out of range, the low signal icon will appear in display.

•If the handset gets out of range, the no signal icon will appear in display. If tone + icon is selected, beeps will appear with short intervals as long as the handset is out of range.

To change the settings:

1Press Menu to enter main menu.

2Scroll to Settings and press Select.

3Scroll to Out of range and press Select.

4Scroll to Settings and press Change.

5Scroll to the desired alert and press Select.

Polycom, Inc. 59