Polycom Kirk 5020-5040 User Guide

Settings

 

 

 

 

1Press Menu to enter main menu.

2Scroll to Settings and press Select.

3Scroll to Advanced and press Select.

4Scroll to Login and press Select.

5Scroll to Select Login and press Select.

6Scroll to the desired login and press Select.

Removing a Login

Logins can be removed from the system in use and from the 9 other systems (if connected).

Note: Removing a login requires a password. Password is factory set at 0000.

1Press Menu to enter main menu.

2Scroll to Settings and press Select.

3Scroll to Advanced and press Select.

4Scroll to Login and press Select.

5Scroll to Remove login and press Select.

6Scroll to the desired login and press Select.

7Enter your password and press Ok.

8If the system in use is removed, it is necessary to select one of the remaining systems or to subscribe to a new one.

Note: If one of the systems not chosen is removed, the handset remains connected to the system in use.

Creating a Login

To create a login, the system must allow subscriptions to be made. Some systems also require an Authentication Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to which you want to subscribe. Authentication Codes and system ID’s will be provided be the system administrator.

You can subscribe up to 15 systems, that is create 15 logins.

1Press Menu to enter main menu.

2Scroll to Settings and press Select.

3Scroll to Advanced and press Select.

4Scroll to Login and press Select.

5Scroll to Create login and press Select. The handset will start searching for a system.

6Scroll to the found system and press Select.

Polycom, Inc.

65

Page 65
Image 65
Polycom 5020, 5040 manual Removing a Login, Creating a Login