Polycom 3725-63211-002, A manual Ferencing Blank System Such as a Polycom

Viewing People and Content

If you
make a
call		This is what you will see in your OTX
between
an...	And a/an...	300 room...	This is what the far site will see...
OTX 300	TPX 306M	Two seats are shown on each display.	The entire OTX 300 room. Two seats
System	or ATX 300	For TPX rooms, this is the entire room.	are shown on each display.
	System	For ATX rooms, it depends on how the
		integrator set up the room.

OTX 300	TPX 204M	The entire TPX 204M room. Two seats	The entire OTX 300 room. Three seats
System	or ATX 200	are shown on the center display and two	are shown on each display.
	System	seats are shown on the left display. The
		right display is blank. For ATX rooms, it
		depends on how the integrator set up
		the room.

OTX 300	Traditional	The people at the far site on the center	The center four seats and a portion of
System	video con-	display. The left and right displays are	the left and right seats at OTX 300 table.
	ferencing	blank.
	system
	(such as a
	Polycom	HDX
	HDX
	system)
OTX 300	More than	In multipoint calls, what you see and what the far site sees depends on a variety of
System	one other	factors including the number of sites in the call, the types of systems in the call, the
	site	cameras being used, and so forth. If a site is using the VNOC, the VNOC operator
	(multipoint	usually configures the layout so that every site sees all the other sites in the call.
	call)	The following illustration shows what you would see in an OTX 300 room when in a
		multipoint call with two TPX 306M sites and one RPX 200 Series site. The left and
		center displays show the TPX 306M sites; the right display shows the RPX 200 site.

3–7