User Guide for the SoundPoint IP 32x/33x Desktop Phone
2.On the back of the phone, remove the key located behind the hook switch and reposition it so that the end tab (at a 450 angle) is facing up.
3.Using wall anchors (not included), fasten the base stand with the mounting tab facing up.
4.Align the base stand tabs with their corresponding insertion points on the phone, and then snap the phone into place (as shown).
Registering the Phone
Generally, your phone will be deployed with multiple other phones. In this case, your system administrator will configure the phone parameters beforehand, so that after you set up your phone, the phone will be registered and ready to use.
If your phone is not part of a large phone deployment, your phone may not be registered after you set it up. Before you use your phone, you or your system administrator will have to register it. For detailed information on how to
1 - 8
