Polycom IP 32x, IP 33x manual Duration and destination

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

•Multiple Line Keys per line

	If your phone is configured with multiple call appearances, refer to Using
	Multiple Call Appearances on page 4-3for instructions on how to answer a
	call.
Note
	Incoming calls may be ignored by pressing the Reject soft key (for private lines) or
	the Ignore soft key (for private and shared lines).
	When your SoundPoint IP 32x/33x phone is configured for silent ring, press the
	ringing Line key or the Answer soft key to answer the call. If your handset is off
	hook, the call is routed to the handset. If your handset is on hook, the call is routed
	to the speaker.
Note
	Dual-tone multi-frequency (DTMF) signaling is not available while a call is incoming.
	You may resume DTMF signaling by pressing the Reject soft key (for private lines)
	or the Ignore soft key (for private and shared lines). For more information, contact
	your system administrator.
	Answering When Not in Another Call
	In all cases, the active call will appear on the graphic display showing call
	duration and destination.
	To answer a call using the handset:
	¾ Pick up the handset.
	To answer a call using Hands-Free Speakerphone mode:
Note
	If “Handsfree mode disabled” appears on the graphic display after you press the
	speakerphone key, your system administrator has disabled the speakerphone on
	your phone.

¾ Do one of the following steps:
— Press	.
— With the handset on-hook, press		opposite the incoming

call (where the line status indicator is flashing green).

— Press the Answer soft key.

3 - 5