Pressure Systems, Inc.

NetScanner™ System (9016, 9021, & 9022) User’s Manual

5.1.3.2 PC-242 Amplifier/Multiplexer Board (9021 ONLY)

The following procedures should be used for replacement of the PC-242 Amplifier/Multiplexer Board. The PC-242 is attached directly to the top plate of the 9021. Use the tools and follow the general warnings already described at the start of Section 5.1.

(1)Disassemble the module as described in Section 5.1.2. Carefully remove the wiring harness from connector P1 of the PC-242 board.

(2)Remove the screws fastening the PC-242 board to the top panel and remove the board assembly. For the 9021 (with D-shell top plate connectors), this will consist of two (2) standoff screws attached to each top plate D-shell connector (for a total of 24 hex standoffs).

(3)Install the new PC-242 board by aligning the twelve interface connectors on the board with the cutouts on the top panel.

(4)Reinstall the hardware that secures the PC-242 to the top panel. Install the wiring harness to connector P1 of the PC-242, ensuring proper pin 1 location. (Pin 1 of the ribbon cable has a red stripe while pin one of P1 will contain a square solder pad on the PC-206.)

(5)Install the module electronics into the housing. Ensure that the alignment posts in the module's bottom panel align with the PC-203 or PC-280 electronics support brackets when placing the top panel and electronics back in the housing.

(6)Replace the six (6) Allen-head screws that secure the top panel to the scanner housing and tighten. Do not over-tighten; 7-9 inch-pounds should be sufficient.

(7)Test your scanner to ensure proper operation.

5.1.3.3 PC-280 Ethernet Microprocessor/A-D Board (9016, 9021, 9022)

The following procedures should be used for replacement of the PC-280 Ethernet Microprocessor/A-D Board. Use the tools and follow the general warnings already described in Section 5.1.1.

(1)Disassemble the module as described in Section 5.1.2.

(2)Carefully remove any attached wiring harnesses from connectors P1, P3, and P6 of the PC-280 board. In the 9016, this will require cutting one nylon tie-wrap attached to the center mounting bracket.

5 - 7www.PressureSystems.com

Page 140 Page 142
Page 141
Image 141
Pressure Systems 9022 user manual 3.2 PC-242 Amplifier/Multiplexer Board 9021 only
Page 140 Page 142

9022 specifications

Pressure Systems 9022 is a state-of-the-art pressure management system designed for various industrial applications, offering unparalleled efficiency and reliability. This innovative system has become a benchmark in pressure technology, providing users with advanced control and monitoring features.

One of the main features of Pressure Systems 9022 is its ability to deliver precise pressure regulation. Utilizing advanced algorithms, the system continuously monitors pressure levels and adjusts them in real-time, ensuring optimal performance and safety. This feature is particularly beneficial in industries such as oil and gas, pharmaceuticals, and food processing, where maintaining specific pressure levels is crucial for product integrity and process efficiency.

The 9022 is also equipped with cutting-edge connectivity options. With built-in IoT capabilities, the system can be easily integrated into existing networks, allowing for remote monitoring and control. Users can access pressure data in real-time through a user-friendly interface, which enhances decision-making and reduces response times in case of irregular conditions.

Another standout characteristic is its robust construction. Designed to endure harsh environmental conditions, the Pressure Systems 9022 is built from high-grade materials that provide excellent resistance to wear and corrosion. This attribute ensures longevity and minimizes maintenance costs, making it an economical choice for businesses.

Moreover, the system incorporates various safety features. Automatic shut-off valves and alarms are integrated into the design to prevent overpressure situations, protecting both equipment and personnel. These built-in safeguards align with industry standards and promote a culture of safety within organizations.

The Pressure Systems 9022 also emphasizes energy efficiency. By optimizing the pressure regulation process, it reduces energy consumption, contributing to lower operational costs and a smaller environmental footprint. This focus on sustainability resonates with modern businesses looking to enhance their eco-friendly practices.

In conclusion, Pressure Systems 9022 stands out as a versatile, efficient, and reliable solution for pressure management. Its advanced features, durability, and commitment to safety make it a valuable asset for any industrial operation. By adopting this technology, organizations can enhance performance while ensuring compliance with safety regulations, ultimately leading to a more productive and sustainable operation.
Top Page Image Contents