Pressure Systems 9022 user manual Diagnostic functions, Span Cal Adjustment gain term

Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual

	The coefficients of internal DH200 transducers used in the Model 9016 are selected
	with array indexes aa=01 through 10 (hex). Coefficients of external 9400
	transducers used by Models 9021 and 9022 (digitally compensated) are selected
	with array indexes aa=01 through 0C (hex). All valid coefficient indexes (for each
	of these arrays) are listed in the following table:
NOTE:	Coefficients used for typical applications are shown in BOLD type.
	All other coefficients are typically not used outside of advanced
	diagnostic functions.

cc	Transducer Coefficient Description	Datum
		Type
00	Re-zero Cal Adjustment (offset) term	FLOAT
01	Span Cal Adjustment (gain) term	FLOAT
02	Dynamic EU Conversion coefficient c0	FLOAT
03	Dynamic EU Conversion coefficient c1	FLOAT
04	Dynamic EU Conversion coefficient c2	FLOAT
05	Dynamic EU Conversion coefficient c3	FLOAT
06	Reserved for Factory Use	----
07	User Defined Date field (see end-of-table note)	INTEGER
08	Date of Factory Calibration (see end-of-table note)	INTEGER
09	Transducer Manufacturing Reference number	INTEGER
0A	Transducer Full-Scale Range code (see Appendix F)	INTEGER
0B-0F	Temperature 1, Pressures 1-5 voltages	FLOAT
10-14	Temperature 2, Pressures 1-5 voltages	FLOAT
15-19	Temperature 3, Pressures 1-5 voltages	FLOAT
1A-1E	Temperature 4, Pressures 1-5 voltages	FLOAT
1F-23	Temperature 5, Pressures 1-5 voltages	FLOAT

3 - 63www.PressureSystems.com