Pressure Systems, Inc.

NetScanner™ System (9016, 9021, & 9022) User’s Manual

approximately one half turn. Ensure there are no connectors from the P1 harness pinched between the top plate and the housing. Ensure the top plate gasket is properly installed. Install the screw that secures the top panel to the housing. Tighten the three (3) screws attached to the PC-280 mounting brackets.

(7)Test your scanner to ensure proper operation.

5.39022 Procedure for Changing the Excitation Jumper Setting (JB1)

The following procedure can be used to change the output voltage selection.

(1)Disassemble the unit as described in Section 5.1.2.

(2)Locate the JB1 jumper block on the PC-317 board (See Figure 5.8, above). It is the only jumper block on the board and is near the end of the unit on the top side of the lower PC board (PC-317), toward the end of the unit nearest the main power and communications connector.

(3)The jumper block may be placed in one of two positions on the board. When the jumper block is placed on the two pins nearest the edge of the board, the ten (10) volt output is selected. When the jumper is placed on the second and third pins from the edge of the board, the five (5) volt output is selected. The PC-317 board will have to be separated from the PC-316 board in order to relocate the jumper. Insure these two boards are fully reseated before proceeding.

(4)Reinsert the electronics into the housing, ensuring that the alignment posts in the module’s bottom panel align with the holes in the PC-280 mounting brackets. This may require loosening approximately one half turn, the three (3) screws attaching the PC-280 board to the top plate . Ensure that no connectors from the P1 harness are pinched between the top plate and the housing. Ensure that the top plate gasket is properly installed. Install the screw that secures the top panel to the housing. Tighten the three (3) screws attached to the PC-280 mounting brackets.

(5)Test your scanner to ensure proper operation.

5 - 20www.PressureSystems.com

Page 153 Page 155
Page 154
Image 154
Pressure Systems 9022 user manual
Page 153 Page 155

9022 specifications

Pressure Systems 9022 is a state-of-the-art pressure management system designed for various industrial applications, offering unparalleled efficiency and reliability. This innovative system has become a benchmark in pressure technology, providing users with advanced control and monitoring features.

One of the main features of Pressure Systems 9022 is its ability to deliver precise pressure regulation. Utilizing advanced algorithms, the system continuously monitors pressure levels and adjusts them in real-time, ensuring optimal performance and safety. This feature is particularly beneficial in industries such as oil and gas, pharmaceuticals, and food processing, where maintaining specific pressure levels is crucial for product integrity and process efficiency.

The 9022 is also equipped with cutting-edge connectivity options. With built-in IoT capabilities, the system can be easily integrated into existing networks, allowing for remote monitoring and control. Users can access pressure data in real-time through a user-friendly interface, which enhances decision-making and reduces response times in case of irregular conditions.

Another standout characteristic is its robust construction. Designed to endure harsh environmental conditions, the Pressure Systems 9022 is built from high-grade materials that provide excellent resistance to wear and corrosion. This attribute ensures longevity and minimizes maintenance costs, making it an economical choice for businesses.

Moreover, the system incorporates various safety features. Automatic shut-off valves and alarms are integrated into the design to prevent overpressure situations, protecting both equipment and personnel. These built-in safeguards align with industry standards and promote a culture of safety within organizations.

The Pressure Systems 9022 also emphasizes energy efficiency. By optimizing the pressure regulation process, it reduces energy consumption, contributing to lower operational costs and a smaller environmental footprint. This focus on sustainability resonates with modern businesses looking to enhance their eco-friendly practices.

In conclusion, Pressure Systems 9022 stands out as a versatile, efficient, and reliable solution for pressure management. Its advanced features, durability, and commitment to safety make it a valuable asset for any industrial operation. By adopting this technology, organizations can enhance performance while ensuring compliance with safety regulations, ultimately leading to a more productive and sustainable operation.
Top Page Image Contents