Pressure Systems, Inc.

NetScanner™ System (9016, 9021, & 9022) User’s Manual

(3)Remove the three (3) 2-56 Phillips head screws securing the PC-280 mounting brackets to the top plate. These screws will be in line with the PC-280 LEDs that protrude through the top plate. Carefully lift the board out of the top panel. See Figure 5.3.

Figure 5.3

PC-280 Board

(4)Using the Phillips-head screwdriver, remove the three (3) PC-280 mounting brackets from the old circuit board and reinstall them on the new circuit board. Ensure that the mounting brackets are installed so that the clearance areas machined into the mounting brackets are towards the PCB assembly. This will prevent electrical shorts between the mounting bracket and electrical traces on the PCB.

(5)Place the new PC-280 board so that its connectors and LEDS protrude through the top panel. Loosely install the three (3) 2-56 screws to secure the PC-280 mounting brackets to the top panel. (To ease reassembly, they will be tightened after installing the electronics back into the module case.)

(6)Reinstall any previously installed wiring harnesses on connectors P1, P3, and P6 of the PC-280 board. Ensure proper pin 1 orientation when installing these connectors.

(Pin 1 of the ribbon cable has a red stripe while pin one of P1 will contain a square solder pad on the PC-206.)

(7)Install the module electronics into the housing, ensuring that the alignment posts in the module's bottom panel align with the holes in the PC-280 mounting brackets. Ensure that there are no conductors from the P1 harness pinched between the top plate and the housing. Ensure that the top plate gasket is properly installed. Install the screws that secure the top panel to the housing. Tighten the three (3) screws attached to the PC-280 mounting brackets.

(8)Test your scanner to ensure proper operation.

5 - 8www.PressureSystems.com

Page 141 Page 143
Page 142
Image 142
Pressure Systems 9022 user manual PC-280 Board
Page 141 Page 143

9022 specifications

Pressure Systems 9022 is a state-of-the-art pressure management system designed for various industrial applications, offering unparalleled efficiency and reliability. This innovative system has become a benchmark in pressure technology, providing users with advanced control and monitoring features.

One of the main features of Pressure Systems 9022 is its ability to deliver precise pressure regulation. Utilizing advanced algorithms, the system continuously monitors pressure levels and adjusts them in real-time, ensuring optimal performance and safety. This feature is particularly beneficial in industries such as oil and gas, pharmaceuticals, and food processing, where maintaining specific pressure levels is crucial for product integrity and process efficiency.

The 9022 is also equipped with cutting-edge connectivity options. With built-in IoT capabilities, the system can be easily integrated into existing networks, allowing for remote monitoring and control. Users can access pressure data in real-time through a user-friendly interface, which enhances decision-making and reduces response times in case of irregular conditions.

Another standout characteristic is its robust construction. Designed to endure harsh environmental conditions, the Pressure Systems 9022 is built from high-grade materials that provide excellent resistance to wear and corrosion. This attribute ensures longevity and minimizes maintenance costs, making it an economical choice for businesses.

Moreover, the system incorporates various safety features. Automatic shut-off valves and alarms are integrated into the design to prevent overpressure situations, protecting both equipment and personnel. These built-in safeguards align with industry standards and promote a culture of safety within organizations.

The Pressure Systems 9022 also emphasizes energy efficiency. By optimizing the pressure regulation process, it reduces energy consumption, contributing to lower operational costs and a smaller environmental footprint. This focus on sustainability resonates with modern businesses looking to enhance their eco-friendly practices.

In conclusion, Pressure Systems 9022 stands out as a versatile, efficient, and reliable solution for pressure management. Its advanced features, durability, and commitment to safety make it a valuable asset for any industrial operation. By adopting this technology, organizations can enhance performance while ensuring compliance with safety regulations, ultimately leading to a more productive and sustainable operation.
Top Page Image Contents