Pressure Systems, Inc.

NetScanner™ System (9016, 9021, & 9022) User’s Manual

connection to the hub itself. If present, verify that the hub link LED for the pressure scanner and the host computer are both active. If the hub is functioning correctly, verify that the communications pins in the module interface cable are wired as described in Section 2.3.4.1 and Appendix D.

!CAL LED should remain OFF

!PRG LED should remain OFF

!Busy (BSY) LED should blink 8-16 times at a rate of approximately 1 Hz (slower for 9021/9022), delay ON for approximately 5 seconds and then start to continuously blink at approximately 100 Hz (rate dependent on number of internal averages). This faster toggle rate may simply appear as a dimly lit LED. Note that the Busy (BSY) LED will not begin its 100 Hz toggle rate if the dynamic IP addressing (RARP/BOOTP) protocol is enabled and the module has not received a proper IP address response.

Any significant variation from this power-up LED sequence is an indication of a possible cabling or PC-280 microprocessor board error. If the proper power-up LED sequence is not achieved after following the above suggestions, contact the Repair Department at Pressure Systems for additional assistance.

6.1.2Checking Module TCP/IP Communications

If the LED indicators of the 9016, 9021, and 9022 are correct, the module is normally capable of proper communications. In order for communications to be established with a functional 9016, 9021, or 9022 (assuming correct interface cables are used), two user-controlled parameters must be met. First, the module must be configured to obtain a proper (and unique) module IP address. Second, the user’s host computer must have its TCP/IP communications interface properly configured.

6.1.2.1Module IP Address Assignment

Before an Ethernet 9016, 9021, or 9022 can communicate with a host computer, it must have a valid IP address assignment. As explained in Section 2.3.4.1, there are two methods for assigning an IP address to an Ethernet device, static and dynamic. The Static IP addressing protocol is the default method for IP address assignment in the 9016 and 9021/9022. This is primarily because it allows the module to assign its own IP address based on a factory default value. The Dynamic IP addressing

6 - 2www.PressureSystems.com

Page 157 Page 159
Page 158
Image 158
Pressure Systems 9022 user manual Checking Module TCP/IP Communications, Module IP Address Assignment
Page 157 Page 159

9022 specifications

Pressure Systems 9022 is a state-of-the-art pressure management system designed for various industrial applications, offering unparalleled efficiency and reliability. This innovative system has become a benchmark in pressure technology, providing users with advanced control and monitoring features.

One of the main features of Pressure Systems 9022 is its ability to deliver precise pressure regulation. Utilizing advanced algorithms, the system continuously monitors pressure levels and adjusts them in real-time, ensuring optimal performance and safety. This feature is particularly beneficial in industries such as oil and gas, pharmaceuticals, and food processing, where maintaining specific pressure levels is crucial for product integrity and process efficiency.

The 9022 is also equipped with cutting-edge connectivity options. With built-in IoT capabilities, the system can be easily integrated into existing networks, allowing for remote monitoring and control. Users can access pressure data in real-time through a user-friendly interface, which enhances decision-making and reduces response times in case of irregular conditions.

Another standout characteristic is its robust construction. Designed to endure harsh environmental conditions, the Pressure Systems 9022 is built from high-grade materials that provide excellent resistance to wear and corrosion. This attribute ensures longevity and minimizes maintenance costs, making it an economical choice for businesses.

Moreover, the system incorporates various safety features. Automatic shut-off valves and alarms are integrated into the design to prevent overpressure situations, protecting both equipment and personnel. These built-in safeguards align with industry standards and promote a culture of safety within organizations.

The Pressure Systems 9022 also emphasizes energy efficiency. By optimizing the pressure regulation process, it reduces energy consumption, contributing to lower operational costs and a smaller environmental footprint. This focus on sustainability resonates with modern businesses looking to enhance their eco-friendly practices.

In conclusion, Pressure Systems 9022 stands out as a versatile, efficient, and reliable solution for pressure management. Its advanced features, durability, and commitment to safety make it a valuable asset for any industrial operation. By adopting this technology, organizations can enhance performance while ensuring compliance with safety regulations, ultimately leading to a more productive and sustainable operation.
Top Page Image Contents