2700-I ACC Wood Insert

R

C. Blower Replacement

1.Using a 5/32 Allen wrench, remove 4 blower housing mounting bolts and slide assembly out. Figure 22.1.

2.Disconnect the wires from the blower.

3.Using a Phillips head screw driver, remove 4 screws. Figure 22.2.

4.Remove blower from the blower housing assembly.

5.Install new blower and secure with the same 4 screws.

Caution

Shock Risk.

Do NOT remove grounding prong from plug.

Plug directly into properly grounded 3 prong receptacle.

Route cord away from appliance.

Do NOT route cord under or in front of appliance.

6.Re-connect the wires to the blower.

7.Slide the assembly back into position under the ash lip and secure with the 4 mounting bolts.

Remove Bolts and Slide

Blower Assembly Out

Figure 22.1

WARNING

Fire Risk.

Do NOT allow hot coals or embers to overflow ash lip

May melt protective wire coating on fan power cord causing electrical short, fire or injury

Remove 4 Screws & Remove Blower from Housing

Figure 22.2

Page 22

7046-137C

December 15, 2009

Page 22
Image 22
Quadra-Fire 7046-137C warranty ACC Wood Insert Blower Replacement, Shock Risk