Rancilio Millennium manual General Safety Rules, Description

1. GENERAL SAFETY RULES

Don’t leave the packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) within the reach of children, as these elements are potential sources or danger.

Check that the data on the machine corresponds to that of the electrical supply network, before connecting the equipment.

Adaptors, multiple sockets and /or extensions must not be used.

In doubt, request an accurate control of the plant by qualified personnel. The electric plant must be provided with the following safety devices:

-efficient earth connection;

-section of conductors suitable for absorption capacity

-efficient earth leakage protection circuit breaker.

Install the machine on a water repellent surface (laminate, steel, ceramic, etc.) away from heat sources (oven, cooking stove, fireplace, etc.) and in conditions in which the temperature may not go below 5°C. KEEP WARM.

Do not leave the machine exposed to atmospheric agents or place them in damp rooms such as bathrooms.

Do not obstruct the suction or dispersion grilles and do not cover with cloths, etc.

Keep the packed machine in a dry place, not exposed to atmospheric agents and in conditions in which the temperature does not go below 5°C. Do not stack more than three items of the same kind. Do not place heavy items on the packaging.

In an emergency, such as the breaking out of a fire, unusual noise, overheating, etc., take imme- diate action, disconnecting the power and closing gas and water taps.

Only use original spare parts in order to avoid compromising the safety and proper functioning of the machine.

Erroneous installation can cause damage to people, animals and things for which the manufacturer cannot be considered responsible

2. DESCRIPTION

The machines in the MILLENNIUM series have been designed to prepare express coffee and hot beverages.

Apositive-displacement pump inside the machine powers the heater in which the water is heated. By pressing the appropriate buttons, water is supplied to the spouts in the form of hot water or steam, according to needs.

The water to be used for the beverages is supplied directly by the water supply, pressurized by the pump and immediately heated by the steam produced by the boiler.

The machine is composed of a steel carrying structure on which the mechanical and electrical components are fitted. These are completely covered with panels

made of painted polyurethane and stainless steel.

The beverages are dispensed at the front of the machine, where all the buttons, control devices and dispensers are to be found.

There is a cup-warming plate on the top of the machine.

55