Fig. 5
You’ll find all the technical data on electric connection, on the machine identification label Fig. 1.
Machines provided with gas heating have a standard connection kit to carry out the following connections with:
-direct stiff pipe;
-copper and double cone pipe;
-rubber support.
Gas connections must be made in compliance with the safety regulations in force in the relative country.
4. USE
The machine have been designed, manufactured and protected to be used to make express coffee and hot beverages (tea, cappuccino, etc.). Any other use is to be considered unsuitable and therefore dangerous.
The manufacturer cannot be held responsible for any damage caused to people or things due to unsuitable, erroneous or irrational use of the machine.
The operator must always follow the indications contained in this manual. In the case of a failure or if the machine is not working properly, switch it off and do not attempt any direct repair. Refer exclusively to a service centre.
The user must not:
touch the hot surfaces and dispensing areas; place liquids containers on the machine; put his hands under the spouts during use; transport the machine or carry out maintenance operations when the plug is connected or when the machine is hot;
wash the machine with water or steam jet;
dip completely or partially the machine in water; use the machine if the cable is damaged;
59
