Maintenance
10.3 Cleaning the Lens
Keep the lens clean at all times. Any foreign matter on the window will affect 1‐color measurement accuracy and may affect two‐color accuracy. However, care should be taken when cleaning the lens. To clean the window, do the following:
1.Lightly blow off loose particles with “canned” air (used for cleaning computer equipment) or a small squeeze bellows (used for cleaning camera lenses).
2.Gently brush off any remaining particles with a soft camel hair brush or a soft lens tissue (available from camera supply stores).
3.Clean remaining “dirt” using a cotton swab or soft lens tissue dampened in distilled water. Do not scratch the surface.
For finger prints or other grease, use any of the following:
•Denatured alcohol
•Ethanol
Apply one of the above to the lens. Wipe gently with a soft, clean cloth until you see colors on the surface, then allow to air dry. Do not wipe the surface dry, this may scratch the surface.
If silicones (used in hand creams) get on the window, gently wipe the surface with Hexane. Allow to air dry.
Do not use any ammonia or any cleaners containing ammonia to clean the lens. This may result in permanent damage to the lens’ surface!
48 | Marathon Series FA/FR |
