RCA 25450 manual Phone Installation Base Unit, Base Unit Location, Installing Backup Battery

Models: 25450

1 124
Download 124 pages 15.67 Kb
Page 13
Image 13

Connections and Setup

Black Wire

Battery

Battery Compartment Cover

Phone Installation (Base Unit)

Base Unit Location

Place your phone on a level surface, such as a tabletop or desk, near an electrical outlet and telephone wall jack. For the best performance, place the base unit at least 3 feet away from other electronic devices such as a computer or a fax machine. Raise the antenna after the installation is complete.

Installing Backup Battery

The backup battery can provide 30 minutes of normal operation in the event of a power failure. Use only the supplied RCA Nickel Metal Hydride (Ni-MH) Base Unit backup battery.

1.Locate the battery compartment cover and battery pack packaged separately.

2.Plug in the battery pack as shown.

3.Snap the battery compartment cover in place.

4.Charge the backup battery for 10 hours before the first use.

NOTE: If the low battery icon appears in the display when electrical power is on, replace the rechargeable batteries. It is important to replace them as soon as possible to maintain unit operation when electrical power is off. As a precaution, you may want to write down any stored information you do not want erased.

IMPORTANT: If you are not going to use the telephone for more than 30 days, remove the batteries because they can leak and damage the unit.

Installing Handset

Connect one end of the Handset cord to the Handset and the other end to the Handset jack located on the left side of the Base Unit. Use only supplied RCA 25450 Handset.

13

Page 13
Image 13
RCA 25450 manual Phone Installation Base Unit, Base Unit Location, Installing Backup Battery, Installing Handset