RCA 25450 manual Redial Base Unit, To Delete a Number from the Redial Log Base Unit

Using Your RCA 25450 Phone System

Delete?

NOTE: You can toggle between the Headset, Speakerphone and Handset/Receiver by pressing the corresponding buttons or lifting the Handset/Receiver.

4.If the dialing prefix function is enabled via phone setting menu, the dialing prefix will be inserted before the phone number entered.

5.Before the auto or manual line-selection dial is made, an incoming call takes priority and will cancel the pre-dialing.

Redial (Base Unit)

The redial function allows the user to dial a number from the last 10 numbers dialed.

1.To redial a number, press the Redial button. The last phone number will be displayed.

NOTE: If the Redial log is empty, the Redial display will show “Redial log empty” and return to Standby Mode in 5 seconds.

2.Press 5 or 6 on the Navigation button to scroll through the last 10 numbers dialed.

3.Press the Dial, Speaker or Headset (when a headset is plugged in) button, or pick up the handset (off-hook) to make an auto line-selection dial; or press Line (1-4) to make a manual line-selection dial. The phone number shown will be sent.

4.Before the auto or manual line-selection dial is made, an incoming call takes priority and will cancel the redial.

To Delete a Number from the Redial Log (Base Unit)

1.Press the Redial Button. The last phone number will be displayed.

2.Press 5 or 6 on the Navigation button to scroll to the number to be deleted.

3.To delete a number from the Redial log, press the soft button. Press

the soft button to delete (a confirmation tone will sound) or the soft button to keep it in the Redial log.

33