RCA manual Copying DV to DV, Hollywood DV-Bridge DV VCR or DV Camcorder

Copying DV to DV

If you have two DV devices and you want to copy material from one to the other, the most straightforward way is to connect them directly. However, it might be more convenient to copy through the Hollywood DV-Bridge. For example, if you already have one or both of your DV devices connected to the DV-Bridge from a previous procedure, or if both DV devices have 4 pin to 4 pin connectors and you only have 4 pin to 6 pin cables.To begin copying, make sure that the Hollywood DV-Bridge is powered up. Then follow the procedures below.

Connecting DV Input

Connect a 1394/FireWire/i.LINK cable from the DV connector on the source DV cam- corder or VCR to the 1394 connector on the front of the Hollywood DV-Bridge.

Hollywood DV-Bridge

DV VCR or DV Camcorder

VHS

DV Out DV In

Front

Connecting DV Output

Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the back of the Holly- wood DV-Bridge to the DV connector on the destination DV camcorder or VCR.

Hollywood DV-Bridge

DV VCR or DV Camcorder

DV Out DV In

VHS

(To AC Power)

Back

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 56