Sending Scan Files by Scan to Folder

G Specify the destination folder.

You can specify the destination folder in the following ways:

•Select it from the destination list.

•Specify its registration number.

•Enter the path for the folder of a client computer on the same network directly.

•Specify the folder in the FTP server.

•Select it from the client comput- ers on the same network.

Note

❒Destinations in the destination list and registration numbers must be registered in advance in [System Settings]. For details, see “System Settings”, General Settings Guide.

❒Depending on the security set- tings, certain destinations may not be displayed.

Note

❒ If the target destination does

 

not appear, take one of the

 

following steps:

 

• Display the destination by

 

selecting its initial letter

 

from the title.

 

• Display the destination by

 

pressing [U] or [T].

 

❒ If a protection code has been

3

set for the shared folder, a

screen for entering the protection code appears.

B To select more destination fold- ers, repeat step A.

Note

❒To deselect a destination, press the destination once more, or press [UPrev.] or [TNext] to dis- play the destination in the des- tination field, and then press the {Clear/Stop} key.

Selecting a destination folder from the listA Select the destination folder.

The selected folder is highlighted and also is displayed in the destination field at the top of the screen.

Using a registration number to select a destination folder

APress [Registration No.].

BEnter the five digit registration number that has been assigned to a destination folder using the number keys.

If the entered number is less than five digits, press the {#} key after the last number.

Example: To enter 00004

33