Initial Scanner Setup

Destination List Settings

 

Send Settings

Select the defaults for the titles and the display priority for the destination list in the machine and the delivery server.

❖Destination List Display Priority 1

Select a destination list to be dis- played when the machine is in the initial state. You can select either

[E-mail / Folder] or [Delivery Server].

❖Destination List Display Priority 2

This function is available when [E- mail / Folder] is selected for [Destina- tion List Display Priority 1].

Select a destination list to be dis- played when the machine is in the initial state.

You can select either [E-mail Ad- dress] or [Folder].❖Select Title

Select the titles for destinations and group destinations of e-mail and Scan to Folder. Selected titles appear in the e-mail and Scan to Folder destination list to be used

for searching for destinations. Se-

9 lect [Title 1] (ten titles), [Title 2] (ten titles), or [Title 3] (five titles).

❖Update Delivery Server Destination List

To update the delivery server des- tination list, press [Update Delivery Server Destination List].

Normally, the delivery server des- tination list is automatically updat- ed. This function allows manual updating at any time.

This section explains how to set the defaults for settings such as the compression level for the scan file and switching to and from the network TWAIN scanner function.

The settings consist of the following. For the table about settings and de- faults, see p.97 “Scanner Features”.

❖TWAIN Standby Time

When the machine is being used to send e-mail or a file, or functioning as Document Server or a network delivery scanner, a scanning re- quest to the machine as a TWAIN scanner will switch the machine to the network TWAIN scanner func- tion. This setting determines the delay until the machine switches to the network TWAIN scanner func- tion.

•When [Off] is selected, the ma- chine will switch to the network TWAIN scanner function at once.

•When [On] is selected, you can enter the delay time with the number keys (3-30 seconds). The machine will switch to the network TWAIN scanner func- tion when the time set here passes after the last key opera- tion.

❖File Type Priority

Select whether to send the scanned originals as single-page files or a multiple-page file.

For single-page files, select either TIFF/JPEG or PDF. For multi-page files, select either TIFF or PDF.

Note

❒ You cannot select multi-page TIFF format for an image stored in JPEG format.

104